RE5R05A: TCC control valve kit (1st and 2nd design casting only)
RE7R01A, JR710E, JR711E, JR712E: Low brake switch boost valve kit
Also fits TCC control bore in Hyundai/Kia A5SR1 and Subaru 5EAT valve bodies.
Symptoms:
Lockup shudder
TCC cycling
TCC codes
Burnt converter
Harsh downshifts
Harsh engagement
Cause:
Wear at the TCC control plunger sleeve allows pressure loss that causes TCC problems. Wear at the low brake switch boost sleeve causes harsh downshifts.
Correction:
Restore proper TCC or Low brake function by installing Sonnax TCC control valve/Low brake switch boost valve kit.
Warning:
The RE5R05A 3rd and 4th design TCC control plunger valve has a larger diameter (.282") than the valve in this kit. Installing 63741-05K into a 3rd or 4th design application will cause excessive apply pressure, resulting in drivability concerns related to a lack of power and harsh converter apply. Do not install this kit into the TCC control bore of a 3rd or 4th design casting!
Vehicles equipped with 1st and 2nd design Jatco/Nissan RE5R05A valve bodies may have TCC concerns such as lockup shudder, premature or bumpy apply, slippage and/or a burnt converter. These issues can be caused by wear in the TCC control sleeve, which allows apply pressure leakage.
Vehicles equipped with Jatco/Nissan RE7R01A, JR710E, JR711E and JR712E transmissions may display harsh downshifts caused by wear and leakage in the Low brake switch boost sleeve. All above issues can be solved by installing Sonnax TCC control valve kit/Low brake switch boost valve kit into the appropriate bore.
Drop-in part, no special tools required
Sleeve is manufactured from highly wear-resistant aluminum alloy
RE5R05A: TCC control valve kit (1st and 2nd design casting only)
RE7R01A, JR710E, JR711E, JR712E: Low brake switch boost valve kit
Also fits TCC control bore in Hyundai/Kia A5SR1 and Subaru 5EAT valve bodies.
Symptoms:
Cause: Wear at the TCC control plunger sleeve allows pressure loss that causes TCC problems. Wear at the low brake switch boost sleeve causes harsh downshifts.
Correction: Restore proper TCC or Low brake function by installing Sonnax TCC control valve/Low brake switch boost valve kit.
Warning:
The RE5R05A 3rd and 4th design TCC control plunger valve has a larger diameter (.282") than the valve in this kit. Installing 63741-05K into a 3rd or 4th design application will cause excessive apply pressure, resulting in drivability concerns related to a lack of power and harsh converter apply. Do not install this kit into the TCC control bore of a 3rd or 4th design casting!
Vehicles equipped with 1st and 2nd design Jatco/Nissan RE5R05A valve bodies may have TCC concerns such as lockup shudder, premature or bumpy apply, slippage and/or a burnt converter. These issues can be caused by wear in the TCC control sleeve, which allows apply pressure leakage.
Vehicles equipped with Jatco/Nissan RE7R01A, JR710E, JR711E and JR712E transmissions may display harsh downshifts caused by wear and leakage in the Low brake switch boost sleeve. All above issues can be solved by installing Sonnax TCC control valve kit/Low brake switch boost valve kit into the appropriate bore.
Note: Will also work in some RE4F02A units. Compare sleeve I.D., depth, overall length, OD and feed hole location.
Content:
SONNAX Installation Instructions