its '91-later units with factory-style sleeve. Can be retrofit to '89-91 units. See instructions for details.
Symptoms:
Uncontrollable line rise
High line pressure
Broken parts
Broken clutch piston
Cause:
Worn boost valve sleeve allows reverse oil leakage and worn end plug causes imbalance of pressure regulator valve
Correction:
Ensure proper main regulator valve control with this boost valve and sleeve kit with O-ringed balance oil plug. Replaces '91 current OE boost valves.
Common problems in vehicles with a 4L80-E and 4L85-E transmissions are uncontrollable line rise (upward of 500-600 psi), high line pressure in reverse, buzzing noise, broken direct clutch drums and/or broken cases. These problems are usually caused by reverse boost oil that enters the torque signal circuit due to a wear-created cross leak at the sleeve. High line pressure and buzz is created by oil leakage past the aluminum balance plug. The Sonnax boost vavle kit 34200-03K eliminates these problems.
Hardened steel boost valve with over 20% wider spools to provide better durability and increased sealing contact area.
Boost valve spools have annular grooves to reduce side loading that causes wear.
Valve and sleeve are manufactured to close tolerances to restore proper clearance and hydraulic integrity.
Kit includes a replacement aluminum balance oil plug with an O-ring to ensure proper sealing and adequate back pressure on the pressure regulator valve.
Note:
If you detect leakage between the sleeve and pump bore, use 34200-01K, which includes an O-ringed sleeve to compensate for pump bore wear and prevent pump scrappage.
its '91-later units with factory-style sleeve. Can be retrofit to '89-91 units. See instructions for details.
Symptoms:
Cause:
Worn boost valve sleeve allows reverse oil leakage and worn end plug causes imbalance of pressure regulator valve
Correction:
Ensure proper main regulator valve control with this boost valve and sleeve kit with O-ringed balance oil plug. Replaces '91 current OE boost valves.
Common problems in vehicles with a 4L80-E and 4L85-E transmissions are uncontrollable line rise (upward of 500-600 psi), high line pressure in reverse, buzzing noise, broken direct clutch drums and/or broken cases. These problems are usually caused by reverse boost oil that enters the torque signal circuit due to a wear-created cross leak at the sleeve. High line pressure and buzz is created by oil leakage past the aluminum balance plug. The Sonnax boost vavle kit 34200-03K eliminates these problems.
Note:
If you detect leakage between the sleeve and pump bore, use 34200-01K, which includes an O-ringed sleeve to compensate for pump bore wear and prevent pump scrappage.
Contents:
SONNAX Installation Instructions